Banding Tool - Safety Signs by Caledonia Signs
- Caledonia Catalogue Page: 141 (EDITION 26)
- ISO Compliant Safety Signage - wherever possible.
PLEASE LOG IN FOR TRADE PRICING
Has a tensioning capability of 2,4lbs and a built-in cutter for use with banding straps up to 19mm wide.
1. Push band through buckle teeth towards the operator, ears up. Pass band around object and again through buckle. (For best results repeat this operation to obtain double banding). Anchor end of band by folding back under buckle. Take up slack.
2. Place band in slots of tool and push nose of tool against the buckle. Grip band with clamping lever and apply tension by turning handle. Maximum pressure is being applied when there is no appreciable movement of band between nose and clamping block.
3. Swing tool over buckle. This movement increases tension of band and, to avoid breakage, handle must be reversed slightly as tool is swung over, whilst maintaining band tension. Cut band with cutter lever and slide tool off in same position (or tension will be lost).
4. Hammer ears down over cut band.
Related Products
Double Sided Tape - 33m x 25mm
Acrylic high-bond foam tape (33M long roll and 25mm wide tape) Used extensively within the sign industry to bond metals, plastics and ACM. Its viscos elastic properties make it ideal for bonding dissimilar materials with different expansion rates. Superior holding power in any application where performance critical bonding is essential Withstands: Extremes of temperature, High forces applied to ..
Silicone
Used to seal joints, gaps, and seams in a variety of construction, building, and signage applications. Its elasticity allows it to accommodate movement without cracking, making it ideal for areas that experience expansion, contraction, or vibration. The sealant is UV resistant and colourfast, ensuring long-lasting performance even when exposed to sunlight, weather, or moisture. Its ease of applica..
Double Sided Adhesive Pads (Pack of 4)
Securely attach signs, panels, or lightweight objects to walls, doors, or other surfaces without the need for screws, nails, or drilling. These pads provide a strong bond while keeping the installation clean and damage-free, making them ideal for temporary or permanent sign mounting where traditional fixings are not practical. You should use these adhesive pads when fixing lightweight signs, such..
Velcro Hook and Loop Pad (Pack of 10)
Pack of 10 hook and loop fastening pads with high bond self-adhesive backing20mm dia. pads..
Tags: 58751, Fixings, Accessories, Posts, Page141.