Temporary Reflective Traffic Signs | High Visibility Control

Reduce Speed Now Safety Signs

A Reduce Speed Now sign is vital for alerting drivers to slow down immediately for safety reasons. It helps prevent accidents by warning motorists to adjust their speed before reaching hazardous areas such as sharp bends, pedestrian crossings, construction zones, or areas with heavy foot traffic. By encouraging timely speed reduction, this sign protects pedestrians, cyclists, and other road users,..

Works Exit Safety Signs

A Works Exit sign is crucial for clearly marking the designated exit point from a workplace, construction site, or industrial area. This sign helps guide employees, contractors, and visitors safely out of the premises, especially during emergencies or routine departures. A Works Exit sign is crucial for clearly marking the designated exit point from a workplace, construction site, or industrial a..

Caution - Icy Conditions Please Drive with Care Safety Signs

A Caution "Icy Conditions Please Drive with Care sign is vital for warning drivers of potentially slippery or hazardous road surfaces due to ice or frost. It prompts motorists to reduce their speed, increase stopping distances, and stay alert, key actions that can significantly reduce the risk of accidents in cold weather. This sign is especially important in areas prone to sudden drops in temper..

Pedal Cycle Route Only - Class RA1 Safety Signs

With an increasing number of cyclists and cycle routes due to the green revolution the need for effective signage has never been greater. This sign is designed to DfT (Department for Transport) Fig. 955 specification. This tough wearing 3mm thick aluminium composite sign comes with channelling on the rear for easy post mounting. Includes RA1 reflective face material for temporary display or for us..

Pedal Cycle & Pedestrian Route Only - Class RA1 Safety Signs

With an increasing number of cyclists and cycle routes due to the green revolution the need for effective signage has never been greater. This sign is designed to DfT (Department for Transport) Fig. 955 specification. This tough wearing 3mm thick aluminium composite sign comes with channelling on the rear for easy post mounting. Includes RA1 reflective face material for temporary display or for us..

Electric Vehicle Recharging Point Only - Class RA1 - Temporary Safety Signs

With the growth in sales and usage of electric vehicles in the UK, the need to identify and access charging points is likely to see substantial demand. This sign displays the universally recognised DoT (Department of Transprt) car recharging symbol and the standard P for parking, this tough wearing 3mm thick aluminium composite sign comes with channelling on the rear for easy post mounting. Includ..

Electric Vehicle Recharging Point - Permit Holders Only - Class RA1 - Temporary Safety Signs

With the growth in sales and usage of electric vehicles in the UK, the need to identify and access charging points is likely to see substantial demand. This sign displays the universally recognised DoT (Department of Transprt) car recharging symbol and the standard P for parking, this tough wearing 3mm thick aluminium composite sign comes with channelling on the rear for easy post mounting. Includ..

Fold Up Sign - "End" Supplementary Text Safety Signs

Used in road traffic management to clearly indicate the point where a temporary restriction, hazard warning, or traffic management zone finishes. The word "End" is a direct, unambiguous instruction to drivers that they are leaving a controlled or hazardous area and can resume normal driving conditions. Because it is press on studs, it is designed for temporary use, allowing quick deployment and ea..

Fold Up Sign - "Grass Cutting" Supplementary Text Safety Signs

Alert pedestrians, cyclists, and drivers to temporary maintenance activities in public or private areas, specifically where grass cutting or lawn maintenance is taking place. The press on studs allows the sign to be quickly deployed and removed, making it ideal for short-term or mobile work areas where crews move from one section of grass to another. Clearly communicates the specific nature of the..

Fold Up Sign - "Overhead Works" Supplementary Text Safety Signs

Warn pedestrians, cyclists, and drivers of temporary activities or hazards occurring above head height, such as construction, maintenance, or utility work. The press on studs makes it easy to deploy and remove, providing a portable and flexible solution for work areas that change location or are only temporarily active. Clearly specifies the nature of the hazard, helping people understand why caut..

Fold Up Sign - "Tree Cutting" Supplementary Text Safety Signs

Alert pedestrians, cyclists, and drivers to temporary maintenance or hazard activities involving tree felling, pruning, or branch removal. The press on studs allows for quick deployment and easy removal, making it ideal for work crews who move between different sections of a park, roadside, or woodland. Clearly communicates the specific nature of the hazard, helping the public understand why cauti..

Fold Up Sign - "Hedge Cutting" Supplementary Text Safety Signs

Alert pedestrians, cyclists, and drivers to temporary maintenance or hazard activities involving tree felling, pruning, or branch removal. The press on studs allow for quick deployment and easy removal, making it ideal for work crews who move between different sections of a park, roadside, or woodland. Clearly communicates the specific nature of the hazard, helping the public understand why cautio..

Adult and Child - Class R2 Safety Signs

Traffic sign design to Chapter 8, DfT and TSRGD guidelines. Class R2 is a high intensity prismatic material designed to retain a high reflectivity level for a minimum of 12 years and are CE-marked for use as permanent traffic signs as required by law. Class R2 traffic signs are manufactured from a 3mm aluminium composite making them lightweight and eliminating scrappage values, reducing the ..

Fold Up Sign - "Road Sweeping" Supplementary Text Safety Signs

Alert drivers, cyclists, and pedestrians to temporary street cleaning or sweeping activities. The press on studs allows for easy deployment and removal, making it perfect for work crews who need to move the signage along the route as the cleaning progresses. Clearly communicates the specific activity, ensuring that road users understand why they need to slow down, take care, or give way to the mai..

Adult and Child - Class RA1 Safety Signs

Traffic sign design to Chapter 8, DfT and TSRGD guidelines Manufactured from a 3mm aluminium composite making them lightweight and eliminating scrappage values, reducing the potential for theft. Class RA1 is an engineer grade material with reflectivity levels offering approximately 7 years lifespan. Supplied complete with channeling for post mounting...

Fold Up Sign - "Gully Emptying" Supplementary Text Safety Signs

Warn drivers, pedestrians, and cyclists of temporary maintenance activities involving the cleaning or emptying of road gullies, drains, or sewer access points. The press on studs allows for quick deployment and removal, making it ideal for work crews who move between multiple locations along a street or site. Clearly communicates the nature of the activity, ensuring that road users understand why ..

Fold Up Sign - Road Narrows Right Safety Signs

Warn drivers that the road ahead will narrow on the right-hand side. The triangular shape and the symbol are universally recognized as a warning sign, alerting road users to adjust their speed, position, and attention to safely navigate the narrowing section. The fold-up design allows the sign to be portable and quickly deployed, making it ideal for temporary traffic management situations, roadwor..

Fold Up Sign - Men At Work Symbol - 600mm Triangle Sign Safety Signs

Warn drivers and pedestrians that roadworks or maintenance activities are taking place ahead. The triangular shape and the "Men At Work" symbol are universally recognized as a warning, signaling that people may be working on or near the roadway. The fold-up design allows the sign to be portable and easily deployed, making it ideal for temporary worksites or areas where maintenance crews move frequ..

Fold Up Sign - Road Closed - 1050 x 750mm Safety Signs

Inform drivers, cyclists, and pedestrians that a road or section of a road is temporarily closed to all through traffic. The large size and clear "Road Closed" text make it highly visible from a distance, ensuring that road users are adequately warned in advance. The fold-up design allows the sign to be easily deployed, repositioned, and removed, making it ideal for temporary closures due to roadw..

Keep Left - Class RA1 Safety Signs

This essential regulatory road sign is used to direct traffic safely around physical obstructions. Its main purpose is to provide clear and mandatory guidance to drivers, instructing them to pass on the left-hand side of a hazard or obstruction. By clearly indicating the correct side to pass, the sign helps prevent confusion and potential collisions. This sign is vital for maintaining road safety ..

Keep Right - Class RA1 Safety Signs

A crucial regulatory road sign used to direct traffic safely around obstructions by instructing drivers to pass on the right-hand side. It is typically displayed as a blue circular sign with a white arrow pointing to the right. This clear, mandatory instruction helps ensure that vehicles avoid fixed or temporary hazards, such as traffic islands, central reservations, or roadworks, by taking the co..

Direction Arrow Left / Right - Class RA1 Safety Signs

used to clearly guide drivers and pedestrians by indicating the correct direction to follow, especially in areas where traffic or footpaths need to be safely diverted or directed. This type of sign is commonly employed in roadworks, construction sites, parking areas, or event venues to manage traffic flow and ensure smooth, safe navigation. Traffic sign design to Chapter 8, DfT and TSRGD guidelin..

Direction Arrow Forward - Class RA1 Safety Signs

A mandatory road sign that instructs drivers to proceed straight ahead. It features a white upward-pointing arrow on a blue circular background, signaling that no turns are permitted at that point. As part of the RA1 regulatory sign class, it provides clear, enforceable direction, especially where the road layout requires drivers to continue forward to maintain safe and orderly traffic flow. This ..

5mph - Class RA1 - Temporary Safety Signs

A regulatory speed limit sign used to restrict vehicle speed to 5 miles per hour in specific temporary / private conditions. This sign is typically used in environments where extreme caution is required due to close proximity to workers, pedestrians, or hazards. Typically deployed in temporary traffic management situations, such as roadworks, depot areas, site entrances, event spaces, or car parks..

10mph - Class RA1 - Temporary Safety Signs

Used to instruct drivers to reduce their speed to 10 miles per hour in specific temporary / private environments. This sign is typically deployed in areas where cautious and controlled driving is essential for safety, such as construction zones, depot entrances, private roads, car parks, or event sites. The 10 mph limit ensures that drivers can respond quickly to pedestrians, site vehicles, or une..

15mph - Class RA1 - Temporary Safety Signs

Commonly used in temporary traffic management zones such as roadworks, construction sites, event areas, private estates, and depot yards. The 15 mph limit balances the need for safety with the practicalities of traffic flow, allowing vehicles to move cautiously but without causing undue delay. It is often applied where pedestrian activity is present or where vehicle movements are complex and requi..

20mph - Class RA1 - Temporary Safety Signs

Used to enforce a reduced speed limit in temporary or work zones where slower speeds are necessary for safety. Commonly deployed in roadworks, construction areas, school zones during specific times, or event sites, this sign alerts drivers to slow down to 20 miles per hour to protect workers, pedestrians, and other road users. This sign is typically placed at the start of the reduced speed zone an..

30mph - Class RA1 - Temporary Safety Signs

Used to indicate a temporary speed limit of 30 miles per hour in areas where speed reduction is necessary for safety reasons. This is commonly applied in roadworks, maintenance zones, or special events where controlling traffic speed helps protect workers, pedestrians, and drivers. The sign is typically positioned at the beginning of the reduced speed zone and at intervals along the affected rout..

No Entry - Class RA1 Safety Signs

The No Entry "Class RA1 sign is a regulatory traffic sign used in the UK to indicate that vehicles are prohibited from entering a particular road or area. It is a red circular sign with a white horizontal bar across the middle, a universally recognised symbol for no access. As a Class RA1 sign, it carries legal authority, and drivers must comply with the restriction to avoid penalties or accidents..

No Left Turn - Class RA1 Safety Signs

This temporary sign is typically used in situations such as roadworks, temporary diversions, events, or emergency traffic management, where turning left could cause safety issues, congestion, or conflict with other traffic movements. It helps maintain smooth and safe traffic flow by directing drivers to alternative routes and preventing potentially dangerous or obstructive manoeuvres. The No Left..

No Right Turn - Class RA1 Safety Signs

Commonly used during roadworks, diversions, or temporary route adjustments, where allowing a right turn could endanger drivers, disrupt traffic flow, or interfere with site operations. It ensures that vehicles follow safer, designated routes and helps prevent collisions with oncoming traffic or conflict with temporary lane setups and priority systems. This No Right Turn "Class RA1 Temporary sign ..

Fold Up Sign - Men At Work with Text Variant Options Safety Signs

A portable warning sign designed to alert road users, pedestrians, and cyclists that maintenance, construction, or other work activities are taking place ahead. The sign typically features the standard triangular "Men At Work" symbol and allows for additional custom text variants, such as specifying the type of work (e.g., "Road Maintenance," "Drain Cleaning," or "Utility Works-€ù), which provides..

Fold Up Sign - Pedestrians Arrow Left / Right Safety Signs

Guide pedestrians safely around temporary hazards, roadworks, or obstruction areas. The fold-up design makes the sign portable and easy to deploy, while the left or right arrow clearly indicates the direction pedestrians should take to avoid the hazard. This ensures that foot traffic can be safely redirected without confusion, reducing the risk of accidents or interference with ongoing work activi..

Fold Up Sign - Road Narrows Left Safety Signs

Warn drivers that the roadway ahead will narrow on the left-hand side. The triangular shape and the clear "road narrows" symbol are widely recognized as a warning, helping drivers anticipate changes in road width. The fold-up design allows for quick deployment, portability, and easy removal, making it ideal for temporary traffic management situations such as roadworks, lane closures, or emergency ..

Fold Up Sign - Men At Work with Text Variant Options Safety Signs

Provide a clear, portable warning that work activities are taking place in a specific area. The sign typically features the standard triangular "Men At Work" symbol but includes the option to add custom text, such as "Road Maintenance," "Utility Works," or "Drain Cleaning." This flexibility allows the sign to communicate the exact nature of the work, giving road users and pedestrians more precise ..

Fold Up Sign - Warning - ! with Text Variant Options Safety Signs

A portable warning sign designed to alert road users, pedestrians, or site personnel to potential hazards in a temporary or changing environment. The prominent exclamation mark "!" signals a general warning, while the text variant options allow the sign to provide specific information about the hazard, such as "Slippery Surface," "Uneven Ground," or "Work in Progress." The fold-up design makes it ..

Fold Up Sign - Road Narrows Left with Text Variant Options Safety Signs

A portable warning sign used to alert drivers that the roadway ahead will narrow on the left-hand side. The triangular symbol provides a clear visual warning, while the text variant options allow additional information to be added, such as "Temporary Lane Closure," "Construction Ahead," or "Obstruction." The fold-up design ensures the sign is easy to deploy, relocate, and store, making it ideal fo..

Fold Up Sign - Road Works with Text Variant Options Safety Signs

Inform drivers, pedestrians, and cyclists that roadwork or maintenance activities are taking place ahead. The standard triangular "Road Works" symbol draws attention to the potential hazard, while the text variant options allow additional details to be included, such as "Utility Works," "Resurfacing Ahead," or "Temporary Lane Closure." The fold-up design makes the sign quick to deploy, easy to rel..

Vehicle Warning Triangle with Case Safety Signs

This vehicle warning triangle is a crucial safety device used to alert other road users to a stationary or broken-down vehicle ahead. When a vehicle stops unexpectedly on the road due to a mechanical issue, accident, or emergency, placing this warning triangle at a safe distance behind the vehicle warns approaching drivers of the hazard, giving them time to slow down or change lanes safely. Using..

Vehicle Priority - Class RA1 - Temporary Safety Signs

The Vehicle Priority sign is an important traffic control device used to manage the flow of vehicles on roads where the width or layout requires one direction of traffic to give way to the other. This sign clearly indicates which vehicles have the right of way and which must yield, helping to avoid confusion and potential accidents. It is especially useful in areas where the road narrows or where ..

Pedestrians Prohibited - Class RA1 Safety Signs

An important safety measure used to restrict pedestrian access in areas where it could be dangerous or disruptive. Its primary purpose is to clearly communicate that walking is not allowed beyond a certain point, protecting pedestrians from hazards and preventing them from entering spaces designed exclusively for vehicles or machinery. This sign plays a vital role in reducing the risk of accidents..

Stop - Class RA1 - Temporary Safety Signs

A vital safety control measure wherever short-term traffic management is needed. The STOP - Class RA1 sign communicates a clear, non-negotiable instruction for drivers to come to a complete stop, helping protect both road users and workers in unpredictable or hazardous conditions. This is especially important in areas where usual signage or signals are altered due to temporary changes. These signs..

Give Way - Class RA1 Safety Signs

Essential for controlling traffic flow at intersections, junctions, or merge points where one stream of traffic must yield to another. It clearly instructs drivers to slow down and prepare to stop if necessary, giving priority to vehicles on the main road. This helps prevent collisions and promotes smooth, safe traffic movement. Commonly installed at road junctions, roundabouts, slip roads, and en..

One Way Traffic - Class RA1 Safety Signs

This temporary sign is used to clearly indicate that traffic must proceed in a single direction only, helping to manage vehicle flow safely and efficiently during temporary road changes. This sign is vital for preventing confusion and potential collisions when normal traffic patterns are altered. Typically, it is deployed in temporary traffic management situations such as roadworks, events, detour..

Disabled Badge Holder Class RA1 Safety Signs

Provide a clear and visible way to designate parking spaces or areas reserved for disabled badge holders on a temporary basis. These signs help ensure that accessible parking is available where it is needed most, supporting inclusivity and compliance with accessibility requirements during events, construction, or other short-term situations. They are commonly used in temporary parking zones at pub..

Vehicle Priority - Class RA1 - Temporary Safety Signs

Crucial for managing the flow of traffic in areas where vehicles from one direction must give way to oncoming traffic, especially during temporary roadworks or lane reductions. This sign helps clarify which vehicles have the right of way, reducing confusion and minimising the risk of accidents in altered traffic conditions. These signs are typically used in temporary traffic control zones such as ..

Road Hump Ahead - Class RA1 Safety Signs

This sign serves as an important warning for drivers about upcoming speed humps on roads with temporary traffic arrangements. By alerting motorists in advance, the sign encourages a safe reduction in speed, helping to prevent vehicle damage and minimise accidents caused by sudden braking. Typically used in locations where temporary speed control measures are installed, such as construction zones, ..

Two Way Traffic - Class RA1 - Temporary Safety Signs

Used to alert drivers that they are entering or continuing on a stretch of road where traffic flows in both directions, especially in areas where this may not be expected, such as temporarily altered road layouts. This warning is crucial for preventing collisions and ensuring drivers remain vigilant when sharing the road. This sign is commonly placed in temporary traffic management zones, includin..

Two Way Traffic Crossing Ahead - Class RA1 - Temporary Safety Signs

A "Two Way Traffic Crossing Ahead "Temporary" sign is used to warn drivers that they are approaching a section of road where traffic flows in both directions and that there is a crossing point ahead. This is especially important in areas where road layouts or traffic patterns have been temporarily altered, such as during roadworks or maintenance. The sign alerts drivers to be cautious, slow down, ..

Road Narrows Left Side Safety Signs

A "Road Narrows Left Side" sign is used to warn drivers that the roadway will become narrower on the left side ahead. This advance notice helps drivers adjust their speed and position to safely navigate the reduced road width, reducing the risk of collisions or side-swiping with oncoming traffic or roadside obstacles. The sign should be placed before the point where the road begins to narrow on..

Pedestrians Crossing Ahead Class - RA1 Safety Signs

A "Pedestrians Crossing Ahead" sign is used to warn drivers that there is a pedestrian crossing coming up, so they should slow down and be prepared to stop if people are waiting to cross or already crossing the road. This advance warning helps improve safety by giving drivers enough time to react, reducing the risk of accidents involving pedestrians. The sign is typically placed before the pedest..

Pedestrians - Arrow Right - Class RA1 Safety Signs

A "Pedestrians "Arrow Right" sign is used to guide pedestrians safely by indicating that the designated walkway or crossing point is to the right. This sign helps manage pedestrian movement around obstacles, construction zones, or areas where the usual path is temporarily changed, ensuring people follow a safe and clear route. The sign should be installed at decision points or junctions where ped..

Pedestrians Use Other Footway - Class RA1 Safety Signs

A "Pedestrians Use Other Footway" sign is used to inform pedestrians that the footpath or sidewalk ahead is closed or unsafe to use, and they should use the alternative footway on the opposite side of the road. This helps keep pedestrians safe by directing them away from hazards such as roadworks, maintenance activities, or obstructions. The sign is typically installed at the start of the closed ..

Diversion End - Class RA1 - Temporary Safety Signs

A "Diversion End" sign is used to inform drivers and pedestrians that a temporary diversion route has ended, and normal traffic patterns or routes are resuming. This sign helps avoid confusion by clearly marking the point where detours caused by roadworks, closures, or events come to an end. The sign should be installed at the point where the diversion route finishes, giving clear guidance that d..

Diversion - Arrow Right - Class RA1 - Temporary Safety Signs

A "Diversion "Arrow Right" sign is used to direct drivers and pedestrians to follow a temporary detour route that turns to the right. This sign is essential during roadworks, closures, or events when the usual route is unavailable, helping guide traffic safely and efficiently around the obstruction. The sign should be installed at decision points where the diversion route changes direction to the..

Diversion - Arrow Left - Class RA1 - Temporary Safety Signs

A "Diversion "Arrow Left" sign is used to direct drivers and pedestrians to follow a temporary detour route that turns to the left. This sign is essential when the usual road or pathway is closed or obstructed due to roadworks, maintenance, or special events, helping ensure that traffic is safely and clearly guided around the affected area. The sign should be installed at points where the diversi..

Road Closed - Class RA1 Safety Signs

A "Road Closed" sign is used to clearly inform drivers and pedestrians that a particular road is completely closed to all traffic. This warning helps prevent vehicles and people from entering unsafe or inaccessible areas, such as during major roadworks, emergencies, or special events. The sign should be installed at all entry points to the closed road, ensuring that anyone approaching from any di..

Road Ahead Closed - Class RA1 Safety Signs

A "Road Ahead Closed" sign is used to warn drivers and pedestrians that the road ahead is closed further along, allowing them to prepare to stop, turn, or take an alternative route. This early warning helps prevent last-minute maneuvers, reducing the risk of accidents and traffic congestion near the closure. The sign should be installed at a suitable distance before the actual road closure, givin..

New Road Layout Ahead - Class RA1 Safety Signs

A "New Road Layout Ahead" sign is used to alert drivers that the road configuration ahead has recently changed. This warning prepares drivers to expect different lane arrangements, junctions, or traffic patterns, helping them adjust their driving accordingly to navigate safely. The sign is typically placed before the area where the new road layout begins, giving motorists enough time to slow down..

Ramp Ahead - Class RA1 Safety Signs

A "Ramp Ahead" sign is used to warn drivers that there is a ramp coming up on the road. This advance notice helps drivers prepare for a change in road elevation, which could affect vehicle control, especially at higher speeds or in adverse weather conditions. The sign should be installed before the ramp, giving motorists enough time to slow down and adjust their driving to safely navigate the inc..

When Red Light Shows - Class RA1 - Temporary Safety Signs

" When Red Light Shows" signs are crucial safety warnings used in temporary traffic control situations, such as roadworks or temporary traffic signals. They instruct drivers that they must stop when the traffic light displays a red signal, ensuring orderly and safe flow of traffic through altered or potentially hazardous sections of the road. These signs are important because temporary traffic si..

Works Access - Class RA1 Safety Signs

" Works Access" signs are important because they clearly indicate the entry or exit points used by construction or maintenance vehicles accessing a worksite. These signs help alert both drivers and pedestrians to the presence of heavy machinery or work vehicles that may be entering or leaving the area, reducing the risk of collisions and enhancing overall safety around the work zone. They are par..

Road Closed Access Only - Class RA1 Safety Signs

A "Road Closed Access Only" sign is used to indicate that a particular road is closed to through traffic but remains accessible for certain vehicles, such as residents, delivery drivers, or emergency services. This sign helps prevent unnecessary traffic while allowing authorised vehicles to enter for legitimate reasons. The sign should be installed at the entrance to the closed road, clearly visi..

Heavy Plant Crossing - Class RA1 Safety Signs

Heavy Plant Crossing signs are essential safety warnings used to alert drivers and pedestrians that large construction or agricultural machinery may be crossing or operating near the road ahead. These vehicles, often slow-moving and bulky, can pose significant hazards due to their size, reduced maneuverability, and limited visibility. The importance of these signs lies in giving advance notice to..

Flood Class RA1 Safety Signs

Flood warning signs are crucial for alerting drivers and pedestrians to areas where flooding may occur or is currently present. These signs help prevent accidents by informing road users of hazardous water conditions ahead, such as deep water, slippery surfaces, or road closures caused by flooding. Early warning allows drivers to slow down, take alternative routes, or proceed with caution, reducin..

Slippery Road - Class RA1 - Temporary Safety Signs

Slippery Road temporary signs are important because they warn drivers of sections of the road where conditions may cause reduced traction, increasing the risk of skidding or losing control. These hazards can result from recent roadworks, oil spills, wet or icy surfaces, loose gravel, or other temporary factors that make the road more dangerous than usual. These signs should be installed in advanc..

Road Works - Class RA1 Safety Signs

Road Works signs are essential for alerting drivers and pedestrians that construction or maintenance activities are taking place on or near the roadway. These signs warn of potential hazards such as lane closures, machinery, workers, and altered traffic patterns, helping road users to anticipate changes and navigate safely. They should be installed at the beginning of the road works zone and at i..

Tree Cutting Supplementary Plate - Class RA1 - Temporary Safety Signs

Tree Cutting Supplementary Plate signs are important because they alert drivers and pedestrians to ongoing tree cutting or vegetation management activities near or overhanging the roadway. These operations can involve heavy machinery, falling branches, or debris on the road, creating potential hazards that require extra caution. These signs should be installed in advance of the tree cutting work ..

Hedge Cutting Supplementary Plate - Class RA1 Safety Signs

Hedge Cutting Supplementary Plate signs are important because they warn drivers and pedestrians that hedge cutting or trimming work is taking place nearby. Such activities often involve machinery close to the road, flying debris, or temporary obstruction, which can pose safety risks to road users. These signs should be installed ahead of the hedge cutting work area, providing clear advance notice..

Grass Cutting Supplementary Plate - Class RA1 Safety Signs

A Grass Cutting Supplementary Plate "Class RA1 is a temporary road sign used to warn drivers that grass cutting operations are taking place near the road. It serves as an additional plate beneath a main warning sign, such as "Road Works" or "Men at Work," and provides specific context for the maintenance activity. The purpose of this supplementary plate is to enhance road safety by informing drive..

Keep Left / Right - Class RA1 Safety Signs

A Keep Left / Keep Right sign is used to direct traffic safely around an obstruction or hazard on the road, such as roadworks, a central reservation, or a temporary barrier. The purpose of the sign is to clearly instruct drivers which side they must pass on to avoid danger. It helps maintain safe and efficient traffic flow, particularly in areas where the usual road layout is altered or partially ..

End Supplementary Plate - Class RA1 - Temporary Safety Signs

An End Supplementary Plate "Temporary sign is used to indicate the conclusion of a temporary traffic restriction, hazard, or roadwork zone. Placed beneath a main sign, it clearly informs drivers that the specific condition or instruction previously in place - such as a speed restriction, roadworks, or diversion - has officially ended. This helps drivers return to normal driving behaviour with conf..

Pedestrians - Arrow Right - Class RA1 Safety Signs

A Pedestrians "Arrow Right sign is a temporary directional sign used to guide pedestrians safely around roadworks, construction zones, or other obstructions on or near footpaths. It indicates that pedestrians should divert to the right to avoid the hazard, ensuring their safety and maintaining clear, orderly foot traffic in areas where the normal route is blocked or unsafe. This sign is typically..

Pedestrians Use Other Footway - Class RA1 Safety Signs

A "Pedestrians Use Other Footway" sign is a temporary road sign used to instruct pedestrians to cross the road and use the opposite footpath (or sidewalk) when their current path is closed or unsafe. This sign is essential for managing pedestrian flow safely around construction, roadworks, or other obstructions that block or restrict access to part of a footway. This sign is typically used in urb..

Diversion Ends - Class RA1 - Temporary Safety Signs

This "Diversion Ends" sign is used to inform drivers that a temporary detour or alternative route has concluded, and normal road conditions or the original route ahead are now accessible again. This sign helps drivers understand that they can return to their intended path without following the diversion any longer. One key reason for using this sign is to reduce confusion. After navigating a diver..

Diversion - Arrow Right - Class RA1 - Temporary Safety Signs

A "Diversion "Arrow Right" sign is a temporary directional sign used to guide traffic along an alternative route when the usual road is closed or impassable. It features the word "Diversion" with a right-pointing arrow, indicating that drivers must turn right to follow the designated detour. This sign is crucial for maintaining traffic flow and preventing confusion during roadworks, emergencies, o..

Diversion - Arrow Left - Class RA1 - Temporary Safety Signs

A "Diversion "Arrow Left" sign is a temporary road sign used to guide drivers onto an alternative route when the usual road ahead is closed or inaccessible. It features the word "Diversion" with a left-pointing arrow, instructing traffic to turn left to follow a planned detour. This sign is essential for maintaining safe and efficient vehicle movement during road closures, construction, or emergen..

Road Closed - Class RA1 Safety Signs

The "Road Closed" sign is used to indicate that a particular road or section of a road is completely closed to all traffic. This sign communicates that vehicles and pedestrians cannot proceed beyond the point where the sign is placed, ensuring that no one enters a hazardous or inaccessible area. One of the main reasons to use this sign is to protect public safety. Roads may be closed due to constr..

Road Ahead Closed - Class RA1 Safety Signs

Inform drivers that the road they are traveling on is completely closed further ahead, and that they must find an alternative route. This early warning helps prevent drivers from continuing down a blocked or inaccessible road, saving time and avoiding frustration. One key reason to use this sign is to ensure safety. Road closures often occur due to construction, emergencies, flooding, or major rep..

New Road Layout Ahead - Class RA1 Safety Signs

Warn drivers that the road configuration ahead has recently changed. This could involve new lane arrangements, altered junctions, changed traffic flow patterns, or updated signage. By alerting drivers in advance, the sign helps them prepare for unfamiliar road conditions. One key reason for using this sign is to enhance road safety. Changes to road layouts can confuse drivers who are accustomed t..

Temporary Road Surface - Class RA1 Safety Signs

Warn drivers that the road ahead has a surface that is not permanent, such as freshly laid asphalt, gravel, or other temporary materials. This advance notice helps alert drivers to adjust their speed and driving style to suit potentially uneven, slippery, or loose road conditions. One key reason for using this sign is to enhance safety. Temporary road surfaces can affect vehicle handling, braking ..

Ramp Ahead - Class RA1 Safety Signs

The "Ramp Ahead" sign is used to alert drivers that a ramp, such as an entrance or exit ramp to a highway or freeway, is coming up soon. This advance warning allows drivers to prepare for merging, slowing down, or changing lanes safely, helping to prevent last-minute maneuvers that could lead to accidents. One important reason to use this sign is to improve traffic safety. By notifying drivers ear..

Traffic Control Ahead - Class RA1 - Temporary Safety Signs

Warn drivers that they are approaching an area where traffic is being regulated by signals, stop/go boards, or other traffic management devices. This advance notice gives drivers enough time to prepare to slow down, stop, or follow instructions, ensuring a safer and smoother transition through controlled zones. One key reason for using this sign is to enhance safety by preventing sudden braking o..

When Red Light Shows Wait Here - Class RA1 - Temporary Safety Signs

Instruct drivers and pedestrians to stop at a specific point when the traffic signal is red. It clearly marks the exact location where vehicles or pedestrians must halt, ensuring orderly and safe stopping before an intersection, crossing, or roadwork area. This sign is especially important for maintaining traffic safety and flow. By telling drivers where to wait, it prevents vehicles from blockin..

Works Access - Class RA1 Safety Signs

The "Works Access" sign is used to clearly indicate designated entry and exit points for vehicles and personnel involved in construction, maintenance, or other work-related activities on or near a roadway. This sign helps direct workers, delivery trucks, and contractors to the correct access routes, minimising confusion and improving site organisation. One key reason to use the Works Access sign ..

Road Closed Access Only - Class RA1 Safety Signs

The "Road Closed "Access Only" sign is used to inform drivers that a particular road is closed to through traffic but remains open for vehicles needing access to properties, businesses, or services within the restricted area. This sign helps clearly communicate that while the road is not open for general travel, local access is still permitted, preventing unnecessary detours for those who have leg..

Heavy Plant Crossing - Class RA1 Safety Signs

An important safety warning used to alert drivers and pedestrians to the presence of heavy machinery crossing or operating nearby. Heavy plant equipment, such as bulldozers, excavators, or cranes, is often slow-moving, large, and difficult to maneuver, creating potential hazards for other road users. The sign warns motorists to slow down, stay alert, and be prepared to stop if necessary. Using th..

! - Traffic - Exclamation Symbol Safety Signs

A "!" Road Traffic "Exclamation Symbol is used to indicate a general warning to drivers that they are approaching a hazard or unusual condition not covered by a specific road sign. The exclamation mark symbol is a standard, universal way of signalling caution and alerting road users to pay extra attention to the road ahead. Each class designation is made to different high of reflectivity, each ens..

Flood - Class RA1 Safety Signs

This temporary warning sign designed to alert drivers to areas prone to flooding or where flooding is currently affecting the road. The "Class RA1" designation means the sign meets strict reflectivity and visibility standards, ensuring it can be clearly seen in poor weather conditions, low light, or at night. This high visibility is crucial for safety because flooding can create dangerous driving ..

Slippery Road - Class RA1 - Temporary Safety Signs

Warn drivers of temporary road conditions that make the surface slippery and hazardous, such as ice, snow, wet leaves, or freshly treated roads with salt or grit. The "Class RA1" classification indicates that the sign meets specific safety and reflectivity standards for temporary traffic signs, ensuring it is highly visible to motorists, especially in low-light or adverse weather conditions. This..

Temporary Reflective Site Traffic Signs by Caledonia Signs - Trade Only Supplier