• Abrasive Wheel Danger -s & Precautions - Poster

Abrasive Wheel Danger -s & Precautions - Poster - Safety Signs by Caledonia Signs

  • Caledonia Signs Catalogue Page: 47
  • ISO Compliant Safety Signage - wherever possible.

Please select from the options below:


This safety poster covers essential information and advice relating to Abrasive Wheel Groups and best working practices

This poster states:
THE ABRASIVE WHEEL REGULATIONS 1970 HAVE BEEN REPLACED BY THE PROVISION AND USE OF WORK EQUIPMENT REGULATIONS 1998 (PUWER), PLACING A GREATER EMPHASIS ON THE NEED FOR TRAINING AND WIDENING THE SCOPE OF THOSE WHO NEED TO BE TRAINED.

Grinding wheels are safe if used correctly. Do: Read and understand the supplier?s safety instructions; Ensure that the wheel is suitable for its intended use; Handle and store wheels with care; Visually inspect and ring all wheels for possible damage before mounting; Check mounting flanges for equal and correct diameter and that they are clean, free from burrs and recessed where applicable; Use mounting blotters when required; Ensure that work rests are properly adjusted and not more than 3mm away from the periphery of the wheel; Always use a correctly designed and adjusted wheel guard; Wear appropriate PPE (consider eye, ear and hand protection); Conduct a trial run at operating speed with guard in place for at least one minute, standing clear of the machine before use; Turn off coolant before stopping the wheel to avoid creating an out of balance condition; Dress frequently to remove wear and to ensure that the wheel isc utting correctly.

Grinding wheels are dangerous if abused. Do Not: Allow untrained people to mount or use abrasive wheels; Use a wheel that has been dropped or damaged in any way; Force a wheel to fit on the mounting device or modify the size of the mounting hole; Exceed the maximum operating speed marked on the wheel; Apply shock or excessive force to the wheel; Use mounting flanges which are not clean and flat; Tighten the mounting nuts excessively; Trap the work piece between the wheel and the work rest; Start the machine until the wheel guard is in place and securely fastened; Grind on the side of a wheel which is not designed for this operation; Stand directly in front of a grinding wheel whenever a machine is started; Grind material for which the wheel is not designed; Stop the wheel by applying pressure to its surface, let it stop naturally.


Miscellaneous Products / Materials

Any product outside of our standard choice of material/size range starts with a 5. This may include items such as rolls of tape, sign frames, floor graphics or banners. Below you can find a more detailed description of the miscellaneous material options available for this sign design.

Rigid Plastic: Lightweight, gloss white PVC with high impact strength. Suitable for both internal and external safety signs. Easily drilled for wall fixing.

Write a review

Please login or register to review

Related Products

Double Sided Tape 33m x 25mm

Double Sided Tape 33m x 25mm

Acrylic high-bond foam tape (33M long roll and 25mm wide tape)Used extensively within the sign industry to bond metals, plastics and ACM. Its viscos elastic proper..

Double Sided Adhesive Pads (Pack of 4)

Double Sided Adhesive Pads (Pack of 4)

Double coated polyethylene foam tape, rubber based adhesive for high tack and shear performanceSuitable for indoor signage, point of sale posters to board and plas..

Velcro Hook and Loop Pad (Pack of 10)

Velcro Hook and Loop Pad (Pack of 10)

Pack of 1hook and loop fastening pads with high bond self-adhesive backing2m dia. pads..

A2 Snap Frames

A2 Snap Frames

25mm extruded aluminium frame 1.5mm strong plastic back panel Anti-glare poster cover Durable protective frame finish Wall fixing kitLow cost and fantastic looking..

Tags: 58124, Machinery, Regulation, Health, Posters, Factories, Warehouses, Stores, Factory, Rigid, Plastic